Lian Li Industrial Co. With over twenty years of experience in the computer products field, our dedicated team of engineers, production specialists and administrative staff provide the finest quality accessories available on the market. The PC-O11 preserves the many benefits of a dual-chambered case: it keeps your top-of-the-line build clean, unfettered, and in the spotlight. The PC-O11 also includes a removable bracket to prominently mount three mm fans or an additional mm radiator behind the front glass panel.
You could mount as many as two thick mm radiators and a single mm radiator without needing to mod the case! The PC-O11 also includes a removable plate for mounting most water cooling pumps and reservoirs. Its main glass chamber accommodates CPU coolers up to mm in height. You can also opt to mount 2. The kit replaces the standard expansion slot covers.
Showcase your top-end graphics cards with a unique orientation!
Clean and Dust-free The top and bottom panels include removable mesh dust filters covering the primary fan mounts. The drive cages and PSU mount include rubber vibration dampeners to minimize idle noise. About Us. Find The Info You Need. Follow Us. The New King of Tempered Glass.
The PC-O11 claims the throne of our renowned line of aluminum and tempered-glass enclosures. Download Manual.If you are reading this message, Please click this link to reload this page.
Do not use your browser's "Refresh" button. Please email us if you're running the latest version of your browser and you still see this message. Pros: Straight forward design. Lights work great Good pump. Cons: No cable provided for direct connection to power supply. My psu didn't have one either so to do paper clip test, had to order extra cables.
Overall Review: It works as designed. It's a solid product if you have Lian li applicable cases. Had no issues mounting, plugging tubes into, or filling or emptying. The order or cooling is set. If you don't want gpu water going into cpu then I'd go with another one. Has almost no impact on my temps so I don't think it's a huge deal but a note for picky people. Overall Review: Would buy again, but now I get to dis-assemble and replace the pump, which will take a few weeks to get.
Overall Review: Good looking product. Fits perfectly in D XL. Pros: I like the multiple inlet and outlets of the water block allowing you to place fittings in the best location for the nicest runs. The pump is solid and moves a massive amount of coolant. Cons: I didnt like that the pump is so noisy at rpms. Also turning it down at all reduces flow to the point that system components start to heat up higher than normal at idle. Overall Review: Best bang for buck distroplate for a easy loop setup if you have the or xl case.
Cons: Pump has failed. I got a replacement pump and it also failed after a week. Cheap pump. Pros: The Monoblock looks fantastic. High quality and craftsmanship on this piece. Overall Review: Used for about a month and pump failed. Luckily I caught the high temps before the PETG tubes started to melt enough to cause leaks onto my ti and x.
That would have been a disaster. Now ask yourself - do you want to risk your parts using a low quality pump? Skip this and go for a D5. Pros: Easy to setup and use. No issues and looks awesome with the o11D XL case. Overall Review: Highly recommend for that finished look.If you are reading this message, Please click this link to reload this page. Do not use your browser's "Refresh" button. Please email us if you're running the latest version of your browser and you still see this message.
Sold and Shipped by Newegg. Through years of researching, collecting feedback and redesigning; We have successfully craft the best edition of the dual chamber chassis.
Display your hardware like Modern Architecture Experience the full view seamless front and side tempered glasses like a show room. USB 3. Patent Designed Glass Mounting Mechanism The two bolt on the steel pieces adhering on the glass secure the panel with ease.
The Combination of the glass and aluminum, Wide front glass combines with brush aluminum in proper proportion. Double Layer Cable Management Design The angled motherboard tray and the back side cable management bar conceal the and exclude any cable mess. Pros: Huge amounts of space, great design decisions all around. Easy access to the HDD bays on the back is very convenient, particularly if you switch out drives frequently. Tempered glass front and side panels look slick.
Great airflow in the case. Cons: There's a piece of metal you need to unscrew on the cable management side of the case. Top two screws are thumbscrews and super easy to remove, the bottom is a very small phillips head screw. I ended up removing it and never put it back in the case. Not a huge deal. Overall Review: If you want a case with lots of space and excellent airflow, this is your best bet.
Pros: - Side Fan, Tons of options for fans and radiators. Could of even fit 2, mm on rear by increasing case height by 0. It turns out with 2 80mm noctua NF-A8 on the rear it's the most important fans in the whole case when doing air cooled GPU. Noctua rpm bot intake, Noctua rpm bot intake which I will be replacing with 3 QL 's. Overall Review: I would definitely recommend this case to anybody there is not much out there with SIDE rad mount that competes with it those that do have other flaws or are 5x the price.
I would love to see a PC AIR XL version with ability to have 4 mm on top, 4 mm on side, 4 mm on front, 4 mm on bottom, 2 mm on rear all with rad support. I miss the days of Full Towers and getting a case that fits all my needs now a days every case has some kind of flaw.
I'm glad this was a budget case I could be happy with that didn't cost me too much money while I wait for a case company to make one that fits my needs.
Pros: -tons of options to configure air cooling and watercooling -EATX compatible -lots of room and options for cable management -extremely efficient airflow case -looks fantastic -includes magnetic filters for all air passageways that can serve as intakes. Cons: -front panel is very difficult to remove and somewhat difficult to put back on, making changing the front filter a chore.
Overall Review: Absolutely fantastic case. This case has so many features and it was incredibly fun to build in. I was really able to get my system to look and function the way I wanted to. I get great airflow and components stay cool in my overclocked gaming machine.
Lian Li for the win. Overall Review: I have no complaints about this case, its simply all i could want for a pc case i have 9 lian li bora lite fans 3 bottom intake, 3 side intake, 3 top exhaust on a nzxt x72 aio and the air flow is so good that i can have the intake fans set to favor acoustics rather than speed, my ti ftw3 also has plenty of air so i can put a silent fan curve on it as well, the front io audio, usb, power is well routed and easy to manage even if you dont use it there is room under the power supply so you can run extra cable length underneath if needed my only issue which is most likely my fault is that with all of my fans the wires get a bit crazy, but im sure i can fix that issue if i spent some time with some zipties i will keep this case for a long time and plan on doing a full custom loop with the side distro plete.
Pros: Tons of room.Dynamic UNO:. About This Reservoir:. This is a custom one-of-a-kind PC reservoir made of clear acrylic and all stainless steel bolts. Reservoir tutorial here:.
How They're Created:. All reservoirs are pressure tested and thoroughly checked before being mailed out. Machine Finished Semi frosted.
How to Mount it:.Lian Li O11 Dynamic Review - Der8auer Designs a Case
This reservoir has two screws and to notches and uses the same design as the original front glass and it just slides into place on the Lian Li Dynamic case. This reservoir has the input for a water pump, however, a water pump is not included. It requires a D5 or pump. What's Included:. The following is included All mounting hardware is stainless steel :. More Information:. One can be used for a fill port and another for a drain port. This reservoir is made to be used as a single water loop reservoir.
It can be mounted sideways, upside down, and face up. Cannot be mounted as pump up and reservoir facing down. Make sure the fluid level is almost completely full to prevent air getting into the water loop. Requires a D5 or Pump only!The full view front and side panel tempered glass allow for visibility of internal components while providing ease-of-use with a simple, tool-less design. Featuring a multi-chamber box design from Lian Li, the PC-O11 Dynamic chassis step back and focuses on flexibility with plenty of space for water cooling options with support for up to three sets of mm radiators.
The full view front and side panel tempered glass allow for excellent visibility of internal components while providing ease-of-use with a simple, tool-less design. The PC-O11 Dynamic features a dual-chamber design with the power supply and drive cage located at the rear, allowing all component heat to be separated. Total of 9 fan mounting options give you the flexibility to precisely place your fans and radiators where it compliments your build.
Various fan size options are available including mm and mm fan options. The see-through glass panels let colorful LED fans to show through highlighting your creation further. Lian Li maintains a high-quality standard of their products and the PC-O11 Dynamic continues that legacy with.
The tool-less tempered glass panels round out the presentation of the PC-O11 Dynamic making it a visual centerpiece. Two thumbscrews secure all panels in position which are easily accessible and do not require any tools to remove.
The motherboard tray is extended to fully accommodate longer motherboards allowing the grommeted cutouts to show through and provide plenty of space to route and manage cabling.
The cutouts are conveniently placed in an angle so cables pass through cleaner for a more beautiful run to your motherboard. Lian Li provides the PC Dynamic with excellent cable management options including a large cable bar to conceal cables and secure them with the included cable ties. The cable bar helps keep the chassis maintain a clean look while providing extra HDD mounting options for a single 3.
Storage options include support for up to 2x 2. Three more 3. GeForce Windows 10 Build The looks are daunting, special and do make your PC look like something else. Yes, illuminate that Will th We test the unit and see if there is more to it than meets the eye.Dynamic UNO:.
About This Reservoir:. This is a custom one-of-a-kind PC reservoir made of clear acrylic and all stainless steel bolts. Reservoir tutorial here:. How They're Created:. All reservoirs are pressure tested and thoroughly checked before being mailed out. Machine Finished Semi Transparent.
How to Mount it:. This reservoir has two screws and to notches and uses the same design as the original front glass and it just slides into place on the Lian Li XL Dynamic case ONLY! This reservoir has the input for a water pump, however, a water pump is not included.
It requires a D5 or pump. What's Included:. The following is included All mounting hardware is stainless steel :. More Information:. One can be used for a fill port and another for a drain port. This reservoir is made to be used as a single water loop reservoir. It can be mounted sideways, upside down, and face up. Cannot be mounted as pump up and reservoir facing down.
Make sure the fluid level is almost completely full to prevent air getting into the water loop. Requires a D5 or Pump only! Feel free to check my other listings for different sizes and styles. Follow my Instagram:. Shipping Information:. We ship worldwide.
I use the shipping address from your Ebay information. This item will be shipped via USPS. It can take anywhere from days to deliver if you're in the United States. Outside the U. It can take days to receive your package. Please understand it depends on the customs and carrier of your country.Thursday, July 5th Lian Li Industrial Co.
EK-Classic DP Front PC-O11D D-RGB + SPC PWM
Bearing the same multi-chamber design as the PC-O11 Dynamic, the PC-O11 Air takes that design and maximizes it for the best amount of airflow and cooling ever.
The perfect chassis for high-performance workstation where cooling is a must for stability and performance, the PC-O11 Air guarantees unmatched cooling potential to take your build to the fullest. I just swapped my main rig into the dynamic, wonderfully designed and built case im Very pleased but torn now on what could have been. Is it available now?
Not finding it. Might be my next case, looks nice. This looks like a nice design, not so gamer, RBG, and glass everywhere. Interested to see reviews on this Yeh, search online only shows dynamic one now. MetroDetroitGaming Is it available now? Might be my next case, looks nice Updated the story with Newegg links; seems they're not yet available.
The PC-O11 Air is the premium package. Well, if your gonna mount rad s on the front panel, presumably with fans attached, what exactly is the point in the side mounted fans? Seems somewhat redundant to me. Appearance-wise this reminds me somewhat of my old Air But at least it has USB 3 ports on the front panel, hallelujah I was thinking the AIR version would be good for HP air coolers but reading specs and the part the rear exhaust is limited to 90mm means the distance from the MB tray to glass side panel would be limited.
Steve over at GN has a good video up on this case. Has two issues that are of concern, not necessarily showstoppers though: video card height concerns with the power cables on top mounted power cable cards smacking up against the side panel, front dust filter murders temps vs. Honestly sounds like some of these things were not thought out very well? Yes, I saw his vid, did you notice that MSI tower, just barely fit the side panel. All they had to do was widen it a bit 15mm kind of funny if you really need to run water cooled cooling for "AIR" version.
To me, this "AIR" version was an afterthought and not much thought went into it :. He used 3 fans total and max in various locations, in use with adequate fans the filters matter less but it's fair to say all PC's cool better without filters, at least initially. There are a few nuances to the case not mentioned else where.
I bought it to hold a x60 ek coolstream with fans and shrouds and I fitted the rad facing into the case with shroud then fan on show, that's not the way though it should be in the back with the fans mounting onto it from the frontfair enough mistake and i prefer my way personally but my rads 60 mm deep only it and no pull fans would fit.
Now if you had a slim rad ,say mm deep and no pull fans you would encounter what I initially didwarm air recirculating into the case and psu.
I fitted shrouds to the back as well as fans to reduce this effect. This brought the heat sauce exit closer to the vents on the right side panel but not touching so some further work might be done there. To me, this "AIR" version was an afterthought and not much thought went into it : Exactly, this is not a good designed case whatsoever. I really dont like these cases with the cancer growth on the side.
My current Lian Li case has better air flow then that one I do not need to have it in hand to see the design, it won't change. Lian li changed the front panel of their previous case from glass to open ishslapped AIR into the name and called it a day. Don't know about the placement of the side fans Here is the video:. You can say whatever